Proudly made in the state of Maine
Interested in more information on our current products? Look here for all of our product brochures.
[parent] => 0 [count] => 18 [filter] => raw )Interested in more information on our current products? Look here for all of our product brochures.
The MECO IS-301L (left access) or MECO IS-301R (right access) compressed gas panel utilizes a precision, low pressure regulator with capacity for high flow during non-steady-state, upset conditions or high runout service
The SEA-GARD provides an effective rudder post seal in abrasive, coastal waters. Wear materials are softer than those used in
traditional mechanical seals, and permit the use of wide-radius seal faces
The MECO-MB seal model is an elastomer driven, contacting face seal designed to fit inside of an existing stuffing box.
The MECO OFS Type-2 model is the best choice in many sealing applications for low to moderate speed equipment.
The MECO OFS Type-1 seal is frequently the best, fully-split seal for vacuum, low pressure, and abrasive applications.
The MECO EP Type-3 model is the best choice in split sealing technology for horizontal dryers and reactors in vacuum service.
MECO seals offer plastics manufacturers effective, reliable shaft sealing for a wide variety of machinery handling difficult-to-seal products
The MECO EP Type-2 model is the best choice for many sealing applications with low to medium-high shaft speeds, on
small to large shaft diameters
The MECO EP Type-1 seal model is the best choice in wet sealing technology on moderate to very large shaft diameters
entering the vessel from any direction.
The MECO EA Type-2 model is the best choice in many sealing applications for low to moderate shaft speeds on small to
very large shaft diameters
The MECO EA Type-1 fully-split seal model is a great selection when sealing wet slurries.